Can be connected to any metal shield or common ground point on the board. Technical Review & Success Tips Stability Issues:
Using a tool like the MIPITESTER EASY-JTAG or similar, follow these steps: samsung m017f isp pinout
Do NOT connect DAT1-3 unless you verify they are not used for other functions (they may conflict with WiFi or SD card). Can be connected to any metal shield or
To connect the device to an eMMC box (such as EasyJTAG, UFI Box, or Medusa Pro), you must solder to the following points on the motherboard: : Data line 0 : Command line : Clock line VCC (2.8V) : High voltage supply (often provided via USB) VCCQ (1.8V) : Low voltage supply (often provided via USB) Hardware Connection Tips Direct Solder or Medusa Pro)
To establish a successful connection, you typically need to solder jumpers to the following points on the motherboard: : Data line 0 CLK : Clock signal CMD : Command signal VCC (2.8V) : Power supply for the eMMC controller VCCQ (1.8V) : Power supply for the I/O lines GND : Ground (can be soldered to any large metal shield) Implementation Tips