Pacific Fitness Del Mar Home Gym Assembly Manual

A clear call-out for standard tools (metric/Allen wrenches, adjustable wrench, rubber mallet) and a complete hardware kit list (e.g., M10 x 65mm bolts, nylon lock nuts, 3” pulleys).

: Feed cables through the pulley windows in the top beam and down to the weight stack selector stem. Ensure all retainer bolts are tightened after cables are seated. Key Specifications for Del Mar Weight Stack : Up to 208 lbs. pacific fitness del mar home gym assembly manual

A : confusing low pulley and leg developer cables, which causes reversed motion (pushing instead of pulling). Solution: trace each cable’s anchor point. A clear call-out for standard tools (metric/Allen wrenches,

Feed the cable around the pulley at the left rear corner and finally attach it to the top of the weight stack selector stem. National Gym Supply 🔒 Final Inspection & Maintenance Tighten All Fasteners: Key Specifications for Del Mar Weight Stack : Up to 208 lbs

Mount the main post using carriage bolts and stabilizing plates.

: If you are disassembling for a move, take photos of the cable routing through the pulleys, as this is the most complex part of the reassembly. Service Manual, Consumer Strength Equipment

The most intimidating section—the pulley cables—is reframed as a