Din 5480 Spline Dimensions Pdf Verified Best

Defined as: dref = z * m Where z = number of teeth, m = module. Verification check: Confirm the PDF’s reference diameter table aligns with this formula for at least three z values.

The following are some key dimensions and tolerances specified in DIN 5480: din 5480 spline dimensions pdf verified

| Module (m) | Min d(_B) (mm) | Max d(_B) (mm) | Typical Fit Classes | | :--- | :--- | :--- | :--- | | 0.5 | 4.0 | 30.0 | 7f / 8H | | 1.0 | 8.0 | 60.0 | 8f / 9H | | 2.0 | 16.0 | 125.0 | 8f / 9H | | 3.0 | 30.0 | 200.0 | 9f / 9H | | 5.0 | 60.0 | 300.0 | 9f / 10H | | 10.0 | 120.0 | 500.0 | 10f / 10H | Defined as: dref = z * m Where

This information is derived from the official Beuth Verlag (DIN) standards and widely accepted engineering handbooks. din 5480 spline dimensions pdf verified