| Error Code | Meaning | Solution using v5103 | | :--- | :--- | :--- | | | Fuser unit not heating | Reset the fuser counter in the "Parts Life" tab. | | E100-0000 | Laser scanner motor error | Use "Clear Error" function, then recalibrate. | | E732-0000 | Environmental sensor failure | Perform "DCON Clear" (use only if sensor is replaced). | | E808-0000 | Waste toner full | Perform the waste toner reset procedure above. | | "Timeout" error | Printer not in service mode | Re-enter service mode; ensure USB cable is good. |
| Icon / Label | Function | |--------------|----------| | | Read printer EEPROM data (page count, errors, destination). | | Destination | Change region (US, JP, EMEA, CHN). Useful after mainboard swap. | | Ink Level Reset | Resets individual ink tank counters (not for chip-based cartridges). | | Cleaning | Deep cleaning cycle (stronger than normal driver cleaning). | | Test Print | Service mode nozzle check pattern. | | Roller Cleaning | Feeds paper to clean pickup roller (useful for paper jams). | canon service tool v5103
: Canon typically provides this tool only to authorized technicians. Third-party downloads may carry security risks or require a separate "Keygen" to activate. | Error Code | Meaning | Solution using
Connect the printer to your PC via a (Wi-Fi will not work for this tool). Open ServiceTool_V5103.exe . Under the Main tab, find the Clear Ink Counter section. Select Main from the "Absorber" dropdown and click Set . | | E808-0000 | Waste toner full |
The primary purpose of V5103 is to interact with the printer’s
: The tool is most commonly used to clear "ink absorber full" errors (such as Support Code EEPROM Operations