3301pa Nylon Link Link

| Property | PA12 (Standard) | PA11 (Bio-based) | | | :--- | :--- | :--- | :--- | | Flexural Modulus | ~1,200 MPa | ~1,100 MPa | ~1,500–1,700 MPa | | Elongation at Break | ~20% | ~30% | ~25–35% | | Heat Deflection Temp (HDT @ 0.45 MPa) | ~150°C | ~140°C | ~165–175°C | | Moisture Absorption | Low | Moderate | Low to Moderate | | Price Point | Medium | High | Cost-effective |

3301PA has lower warping than PA6, but it’s not PLA. Solutions: 3301pa nylon

3301PA is a trade/family designation for a polyamide (nylon) resin formulated for engineering applications where a balance of strength, thermal performance, and processability is needed. This post explains its key properties, common uses, processing guidance, design considerations, testing/quality checks, and buying tips so you can decide if 3301PA fits your project. | Property | PA12 (Standard) | PA11 (Bio-based)

Resistant to many alcohols, hydrocarbons, and lubricant oils, though like most polyamides, it is hygroscopic (absorbs moisture). Technical Specifications Resistant to many alcohols